Animal models typically require a known genetic pedigree to estimate quantitative genetic parameters. Here we test whether animal models can alternatively be based on estimates of relatedness derived entirely from molecular marker data. Our case study is the morphology of a wild bird population, for which we report estimates of the genetic variance–covariance matrices (G) of six morphological traits using three methods: the traditional animal model; a molecular marker-based approach to estimate heritability based on Ritland's pairwise regression method; and a new approach using a molecular genealogy arranged in a relatedness matrix (R) to replace the pedigree in an animal model. Using the traditional animal model, we found significant genetic variance for all six traits and positive genetic covariance among traits. The pairwise regression method did not return reliable estimates of quantitative genetic parameters in this population, with estimates of genetic variance and covariance typically being very small or negative. In contrast, we found mixed evidence for the use of the pedigree-free animal model. Similar to the pairwise regression method, the pedigree-free approach performed poorly when the full-rank R matrix based on the molecular genealogy was employed. However, performance improved substantially when we reduced the dimensionality of the R matrix in order to maximize the signal to noise ratio. Using reduced-rank R matrices generated estimates of genetic variance that were much closer to those from the traditional model. Nevertheless, this method was less reliable at estimating covariances, which were often estimated to be negative. Taken together, these results suggest that pedigree-free animal models can recover quantitative genetic information, although the signal remains relatively weak. It remains to be determined whether this problem can be overcome by the use of a more powerful battery of molecular markers and improved methods for reconstructing genealogies.
The application of animal models to wild populations promises to revolutionize our understanding of evolutionary genetics in natural environments (Kruuk 2004). This is because animal models, in their broadest sense, are simply individual-based mixed models that use a known pedigree to estimate relatedness among individuals and thereby estimate a range of quantitative genetic parameters (Lynch & Walsh 1998). The key reason that animal models offer such promise for the study of wild populations is that this approach can use a natural pedigree to extract quantitative genetic information under natural conditions. In contrast, most quantitative genetic techniques require breeding experiments and are consequently largely restricted to laboratory or agricultural studies (Falconer & Mackay 1996). Animal models have now been applied to a number of populations to tackle questions as diverse as the heritability of fitness (Kruuk et al. 2000), evolutionary stasis (Merilä et al. 2001; Kruuk et al. 2002), sexual selection and coloration (Hadfield & Owens 2006; Hadfield et al. 2006, 2007), condition dependence (Gleeson et al. 2005), parental care (MacColl & Hatchwell 2003), the genetic consequences of harvesting (Coltman et al. 2003) and the evolutionary response to climate change (Brommer et al. 2005).
Such widespread interest in the animal model approach has, however, led to the realization that the need for a known pedigree is itself a limitation. It is no coincidence that most studies to date using the animal model concern populations that have been the subject of long-term projects (Kruuk et al. 2000, 2001, 2002; Merilä & Sheldon 2000; Merilä et al. 2001; Coltman et al. 2003; Garant et al. 2004, 2005; McCleery et al. 2004; Charmantier et al. 2006a,b). The need for long-term information on individual patterns of mating and reproduction limits the range and type of populations where an animal model can be used. One way potentially to overcome this limitation is to use molecular marker data to estimate the genetic relationships among individuals in a population and then use the resulting relatedness matrix, instead of a known pedigree, to construct the animal model (Lynch & Walsh 1998; Garant & Kruuk 2005; Rodríguez-Ramilo et al. 2007). This approach could allow the animal model framework to be extended to any population for which it was possible to obtain reliable estimates of relatedness based on molecular marker data (Moore & Kukuk 2002), which would greatly expand the range of potential applications if the approach proved to be robust. Such an approach has yet to be fully implemented in any population, however.
The overall aim of this study was therefore to test whether animal models can indeed be based on estimates of relatedness derived entirely from molecular marker data. The idea of estimating quantitative genetic parameters using relatedness estimates derived from molecular marker data has been explored by a number of workers (Mousseau et al. 1998; Thomas & Hill 2000; Thomas et al. 2000; Thomas 2005) and, in particular, has been developed by Ritland (1996, 2000a,b; Ritland & Ritland 1996). Although Ritland's method is conceptually similar to the pedigree-free animal models that we discuss here, there are key differences between the two. The most important of these is that Ritland's method is based on regressing pairwise estimates of phenotypic similarity on pairwise estimates of genetic relatedness (Ritland 1996). Limitations of this approach include difficulties in estimating significance due to non-independence of relatedness estimates and that method of moments relatedness measures do not provide estimates that are internally consistent across the entire population. In contrast, the pedigree-free animal model approach we explore here is based on a relatedness matrix that is positive definite (i.e. relatedness among multiple individuals are congruous), and allows the full power (and convenience) of the animal model to be applied when estimating quantitative genetic parameters.
We apply the pedigree-free animal model to the example of a free-living population of Capricorn silvereyes (Zosterops lateralis chlorocephalus) on Heron Island, a small coral cay on the Australian Great Barrier Reef. This study population is well suited to our needs because we can construct a known pedigree from behavioural information (Kikkawa & Wilson 1983; Robertson et al. 2001), which we have previously used to estimate heritabilities and genetic correlations for a series of morphological traits using a pedigree-based animal model (Frentiu et al. 2007). In addition, we have a dataset that consists of individuals used in a cross-fostering experiment (Frentiu et al. 2007), minimizing the extent to which the effect of shared genes is inflated by the effect of shared environments. Finally, the quantitative genetic basis of morphology in this population of birds is of intrinsic interest because it is an example of an unusually large island race that shows the characteristic pattern for insular passerines (Clegg & Owens 2002), having evolved to be approximately 40% larger than its mainland counterpart in just 4000 years (Clegg et al. 2002a,b; Robinson-Wolrath & Owens 2003; Scott et al. 2003; Frentiu et al. 2007).
The specific aims of the study were to: (i) develop a series of polymorphic molecular markers and determine whether they were able to differentiate between close relatives (full siblings) and unrelated individuals, (ii) estimate quantitative genetic parameters for six morphological traits using Ritland's pairwise regression method and compare these with the estimates from a pedigree-based traditional animal model, (iii) develop a pedigree-free animal model using a molecular genealogy, (iv) determine the effectiveness of the pedigree-free versus the traditional animal model in estimating quantitative genetic parameters, and (v) explore methods to increase the power of the molecular genealogy approach.
2. Material and methods
(a) Study population and morphological measurements
The individuals used in this study (N=479) were the same as those described in a previous study of this population (Frentiu et al. 2007). Briefly, measurements and samples were taken from nestlings in the Heron Island population of Capricorn silvereyes over three consecutive breeding seasons: 2000–2001, 2001–2002 and 2003–2004. The modal clutch size in this population is three, so our expectation was that the sample would contain a substantial number of full siblings. The presence of such full siblings was anticipated to be helpful because it would allow us to check the power of our molecular markers in identifying close relatives. As part of a long-term study of evolutionary genetics in this population, we also conducted reciprocal cross-foster manipulations in which one or two chicks were swapped between pairs of nests and this design was used to implement the traditional animal model (see Frentiu et al. 2007).
Morphological measurements were taken as described by Frentiu et al. (2007). Briefly, six morphological measurements were obtained: wing length; tail length; tarsus length; culmen (bill) length; culmen width; and culmen depth. All measurements were standardized to unit variance and a mean of zero before analysis.
(b) Molecular markers and genotyping
Genomic DNA was extracted from blood samples using a modified salting-out protocol (Nicholls et al. 2000). Eleven microsatellite markers were available from previous studies (Degnan et al. 1999; Frentiu et al. 2003) or obtained by screening other passerine primers for amplification in the silvereye (for details see Frentiu 2004). Loci were tested for deviations from Hardy–Weinberg equilibrium, linkage disequilibrium, selective neutrality and sex linkage using the software MSA (Dieringer & Schlötterer 2003). There was no evidence of null alleles, which can skew relatedness estimates, as indicated by patterns of inheritance across eight silvereye families and by checking the entire dataset using the software Microchecker (Van Oosterhout et al. 2004).
Individuals were genotyped at the selected 11 loci using multiplex PCR in 10 μl volumes containing 15 ng of DNA, 1.0 μM of each primer, 0.2 mM of each dNTP and 0.25 units DNA polymerase (ThermoprimePlus, ABgene, UK) in the manufacturer's buffer, including 1.0 or 1.5 mM MgCl2. PCR cycling consisted of 94°C for 3 min, followed by 33 cycles of 45 s at 94°C, 45 s at the appropriate annealing temperature (Frentiu et al. 2003) and 20 s at 72°C. One primer in each pair was labelled with one of three fluorescent dyes (Applied Biosystems, Warrington, UK). PCR products were analysed using an ABI 377 DNA sequencer and the Genotyper Software (Applied Biosystems, Warrington, UK).
Finally, as a measure of the informativeness of the markers, we calculated exclusion probabilities for parentage assignment, defined as the ability to exclude a ‘random’ individual from parentage when the other parent's genotype is known (Jamieson & Taylor 1997), for each individual marker and then all markers combined.
(c) Marker-based estimates of relatedness
In order to test the performance of both our markers and various methods of estimating relatedness, we estimated relatedness for pairs of individuals expected to be ‘unrelated’ and those expected to be full siblings. Pairs of full siblings were initially inferred on the basis of behavioural observations and were subsequently confirmed using the program Colony (Wang 2004a,b). Relatedness was inferred from molecular markers using three widely used pairwise methods: Queller & Goodnight (QR; 1989); Lynch & Ritland (LR; 1999); and Wang (W; 2002) using allele frequencies based on all typed individuals using the program SPAGeDi v. 1.2 (Hardy & Vekemans 2002). We also estimated relatedness for both categories of relationship using an alternative algorithm based on the simulated annealing approach of Fernández & Toro (FT; 2006). We used full siblings and unrelated individuals as categories because these comprise the two main types of relationship categories present in this dataset.
In addition, because it has been noted that variance in relatedness in a population sample will have a substantial effect on the power to calculate quantitative genetic parameters (Ritland & Ritland 1996; Ritland 2000b; Garant & Kruuk 2005; Csilléry et al. 2006), we calculated the actual variance of relatedness, var(rij) (Ritland & Ritland 1996), for each estimator in the program SPAGeDi v. 1.2 (Hardy & Vekemans 2002). Standard errors of var(rij) were calculated by bootstrapping across loci.
(d) Estimating quantitative genetic parameters
(i) Traditional animal model
For the traditional animal model based on known pedigree information, we followed the methods described in Frentiu et al. (2007). Briefly, additive genetic variances and covariances were estimated from nestling data for all six morphological traits using a restricted maximum-likelihood (REML) animal model (Kruuk 2004), using ASREML v. 1.0 (Gilmour et al. 2002). This model included year of sampling, hatching date and their interaction as fixed effects, while nest of rearing was included as an additional random effect. The known pedigree was based on social interactions alone because a previous study has shown that extra-pair paternity is absent in this population (Robertson et al. 2001).
(ii) Ritland's pairwise regression method
For the pairwise regression method, we used the program Mark v. 3.0 (Ritland 2004) to calculate heritabilities and genetic correlations for the same six morphological traits based on nestling data. Thus, no pedigree information was used in this model. The Queller & Goodnight (1989) estimator of relatedness was used because, according to the method of Wang (2006), this estimator was the most appropriate to use in estimating relatedness (KinInfor software: Wang 2006). We used spectral decomposition to test whether the pairwise relatedness estimates would produce a positive-definite matrix, as indicated by all eigenvalues being positive. It is important to note that, owing to the constraints of the pairwise regression technique, no additional effects were fitted to this model, whereas for the other two types of model we were able to include year of measurement, hatching date and nest of rearing. Nevertheless, this lack of additional factors fits with the rationale of the Ritland method, which aims to estimate quantitative genetic parameters from marker-based relatedness estimates, even in the absence of other types of information (Ritland 2000a,b).
(iii) Molecular genealogy method
There are at least two problems in attempting to apply a pedigree-free animal model based on a relatedness matrix inferred from molecular data alone. First, relatedness estimates need to be represented in a positive-definite symmetrical relatedness matrix, R, to take the place of the pedigree-based relatedness matrix used in the traditional animal model. Although pairwise estimates of relatedness could be arranged in such a fashion, the resulting relatedness matrix will not be positive definite due to internal inconsistencies in relatedness among multiple individuals generated by pairwise estimators. Second, pedigrees in animal models are assumed to be known without error, and although there has been some recent work on the effect of misassigned paternities on heritability estimates (Charmantier & Réale 2005), it is unclear in the context of an animal model how error will influence the performance of the mixed model (Lynch & Walsh 1998).
To overcome these problems, we implemented the simulated annealing approach to the estimation of relatedness developed by Fernández & Toro (2006) to generate a genealogy based on the molecular marker data, rather than a relatedness matrix per se. The key properties of a genealogy in this context are that, unlike relatedness matrices based on pairwise estimates, all relationships between pairs of individuals are symmetrical and all relationships across individuals are consistent with one another. The software MOL_COAN (Fernández & Toro 2006) was used to obtain this genealogy, with the following control parameters for the simulated annealing procedure: maximum number of steps allowed=300; number of solutions tested at each step=5000; initial temperature=0.01; and rate of increase of temperature =0.09. In addition, we specified the numbers of generations present as three, since the data contained three cohorts, and the maximum number of sires and dams as 221 in each category, based on our knowledge of the size of the breeding population. However, no pedigree information was included in this model.
Since the relatedness matrix generated by simulated annealing is guaranteed to be positive definite, this presented the opportunity to explore how error in the estimation of relatedness affected the performance of the animal model. One approach to reducing the error in R is to reduce the dimensionality (or rank) of this symmetrical matrix. In such a high-dimensional space, the vast majority of independent dimensions will represent very minor axes of variance that are likely to reflect measurement error in individual relatedness estimates. We therefore implemented a procedure that enabled an investigation of which subspaces of the relatedness space represented by R were more closely associated with phenotypic similarity. Our approach is similar to that implemented in investigations of the dimensionality of identity-by-descent matrices in the context of variance-component quantitative trait locus analysis (Rönnegård & Carlborg 2007; Rönnegård et al. 2007). A spectral decomposition of R is given bywhere U is an upper triangular matrix of coefficients representing the eigenvectors of R; Λ is a diagonal matrix containing the eigenvalues of R; and superscript T represents the transpose of a matrix. A reduced-rank R (Rn-d) where d is the number of dimensions may then be obtained by defining a subspace of R by selecting a subset of columns of U (Un-d) and applyingRn-d can now be substituted for R in the animal model. All matrix manipulations were conducted in SAS IML (SAS 2001).
We present the results of analyses that used four reduced-rank R matrices, in addition to the full-rank R: R90-d and R25-d, and R13-d and R6-d representing 50, 32, 27 and 23% of the estimated variance in relatedness, respectively (appendix 2 in the electronic supplementary material). The first two of these reduced-rank matrices were chosen for the level of variance in relatedness they explained, while the last two were chosen after an examination of the scree plot of eigenvalues of R (see §3).
We implemented the animal model in this case using the Mixed procedure in SAS (2001). As in the traditional animal model, analyses were based on nestling data and included year of sampling, hatching date and their interaction as fixed effects, and nest of rearing as an additional random effect. Univariate animal models were run for all traits to estimate genetic variances, and genetic covariances were estimated by first estimating the genetic variance in the sum of a particular bivariate trait combination, then taking away the genetic variance of each trait and dividing by two (Mezey & Houle 2005). Substantial problems were encountered in the convergence of REML-based models when the R matrix was substituted into the animal model, with many parameters unable to be estimated in initial analyses. We subsequently determined that three individuals needed to be excluded from the dataset to allow convergence: two birds based on outlying phenotypic values and one based on the convergence diagnostics provided by the Mixed procedure in SAS (2001).
(iv) Comparison of G matrices
Finally, we compared the genetic variance–covariance (G) matrices derived from each of the three methodologies. Since the three methods were not all implemented in the same model, log-likelihood ratio tests for testing differences among genetic parameters in the matrices were not available to us. We therefore adopted a geometric approach that compared the similarity of three-dimensional subspaces of the G matrices usingwhere the matrices A and B contain the first three eigenvectors of the two G matrices to be compared as columns (Blows et al. 2004). The sum of the eigenvalues of S is then a bounded measure of the similarity of the two subspaces (between 0 and 3, with 3 indicating coincident subspaces; Blows et al. 2004).
(a) Molecular markers and genotyping
In total, 44 alleles were found at 11 polymorphic loci in the silvereye population (appendix 1 in the electronic supplementary material). Although allelic diversity was moderate, with a maximum of seven alleles at the most polymorphic locus, observed heterozygosities were high and did not deviate from those expected (appendix 1 in the electronic supplementary material). When we calculated exclusion probabilities for parentage assignment we found that, although each locus individually had a low exclusionary power, the exclusion power of the full set was 0.979.
(b) Marker-based estimates of relatedness
In general, all three of the widely used algorithms for estimating pairwise relatedness performed well in differentiating between known relatives and unrelated individuals (figure 1), with the mean estimated relatedness for full siblings being consistently significantly higher than that for ‘unrelated’ pairs of individuals (QR: t=15.17, d.f.=58, p<0.001; LR: t=13.28, d.f.=58, p<0.001; W: t=11.95, d.f.=58, p<0.001). The simulated annealing approach to estimating relatedness also successfully differentiated between known relatives and unrelated individuals (figure 1), with mean estimated relatedness for full siblings being significantly higher than for putatively unrelated pairs of individuals (FT: t=8.86, d.f.=58, p<0.001). However, this approach tended to underestimate the absolute level of relatedness of full siblings, for which it estimated an average relatedness of 0.11.
We were unable to detect significant variance in relatedness using any of the traditional estimators, with var(rij) ranging from −0.001 to 0.008 and all standard errors being large (QR: var(rij)=0.005 (±0.012), LR: var(rij) −0.001 (±0.005) and W: var(rij) =0.008 (±0.011)). Despite the dataset consisting of full-sib families, the proportion of all pairwise comparisons that were among full-sib pairs was approximately 1%.
(c) Estimating quantitative genetic parameters
(i) Traditional animal model
The results of the traditional animal model analysis based on known pedigree information were reported in detail in Frentiu et al. (2007). Briefly, this method revealed substantial additive genetic variance for all six morphological traits, with genetic variances ranging from 0.13 to 0.24 (table 1a). There was also positive genetic covariance between all six morphological traits (range 0.06–0.22; table 1a). Finally, this method also revealed significant common environmental effects (nest effects) for four of the six traits, the two non-significant traits being culmen width and culmen depth (range 0.03–0.24; table 2).
(ii) Ritland pairwise regression method
Spectral decomposition showed that pairwise relatedness estimated using the QR estimator results in a non-positive-definite relatedness matrix, with approximately half of the eigenvalues being negative (figure 2a).
Ritland's pairwise regression method provided estimates of genetic variance (range −0.001 to 0.002) and covariance (range −0.001 to 0.002) that were very much smaller than those derived from the traditional animal model, with many of the estimates being effectively zero or negative (table 1b). Note that these results supersede those previously reported for this population (Frentiu 2004), and reviewed elsewhere (Garant & Kruuk 2005), which were based on a subset of the data used here.
(iii) Molecular genealogy method
Spectral decomposition confirmed that the simulated annealing algorithm successfully returned an R matrix that was positive definite (i.e. the eigenvalues were positive for all eigenvectors; figure 2b). The scree plot in figure 2b suggested that there may have been a qualitative (although small) difference in the amount of variance explained by the eigenvectors after eigenvectors 6 and 13. We therefore included the R6-d and R13-d reduced-rank matrices in animal models, in addition to two further matrices, R25-d and R90-d that explored the effect of many more dimensions in R on the estimation of genetic variance, but still removed 68 and 50% of the estimated variance in relatedness from the analysis, respectively.
When we used the full R matrix to estimate genetic parameters, we found that only three of the six traits had estimates of genetic variance that were non-zero (appendix 2 in the electronic supplementary material). Subsequent tests indicated that the R25-d and R13-d were the best performing of the models. The R13-d analysis returned all non-zero genetic variances, while the R25-d analysis returned only three non-zero genetic variances and the R25-d analysis returned smaller genetic variances than the R13-d analysis for each trait.
We analysed the data using the R13-d in two further respects. First, we tested for a common environment variance component (nest effect) for each trait in turn (table 2). The reduced-rank R matrix indicated significant common environment effects for five of the six traits (range 0.016–0.304), with the non-significant trait being culmen width, which is also one of the two traits that were non-significant in the traditional animal model (table 2). Second, we estimated the genetic covariance among traits that were found to be very different from those obtained using the traditional animal model, all being negative (table 1c). It is worth noting, therefore, that the overall G matrix estimated by the pedigree-free method, shown in table 1c, breaks the rule that variance–covariance matrices must be positive definite because it contains estimates of covariance that are negative. This is presumably because we estimated each component separately, rather than in a single multivariate analysis, and the covariance estimates themselves are not very robust.
(iv) Comparison of G matrices
The comparison of the three-dimensional subspace between G from the traditional animal model and Ritland's regression method gave a value of only 1.20 for the sum of the eigenvalues of S, indicating a low level of similarity between the two G matrices. The comparison between the traditional animal model and the pedigree-free animal model based on R13-d gave a value of 1.62, indicating a marginally better performance in recovering the genetic covariance structure found by the traditional animal model.
Our results offer a mixed assessment of the potential use of pedigree-free animal models in estimating quantitative genetic parameters in natural populations. On one hand, we have shown that it is possible to implement animal models using a genealogical matrix based exclusively on molecular marker data. In addition, the estimates of genetic variance obtained using this method were of a similar overall magnitude to those obtained using a traditional animal model. Reducing the dimensionality of the molecular R matrix increased the ability of the pedigree-free animal approach in recovering genetic variance, presumably by improving the signal to noise ratio. On the other hand, the estimates of covariance obtained using the pedigree-free animal approach tended to be negative, whereas the traditional animal model showed positive covariance among most traits, and the overall similarity in G matrices between the two techniques was only moderate. Taken together, these results indicate that, while pedigree-free animal models can indeed recover quantitative genetic information, the full pattern of covariance might be difficult to detect.
Our results were less encouraging regarding the potential use of Ritland's pairwise regression method, at least for this population. The pairwise regression method also commonly yielded negative estimates of heritability, additive genetic variance and additive genetic covariance. In addition, the overall structure of the genetic variance–covariance matrices obtained using the pairwise regression technique was more different from that obtained using the traditional animal model method than that recovered from the molecular genealogy approach. The relatively poor performance of the pairwise method should, of course, be assessed cautiously because both the other types of model included additional explanatory factors (year of measurement, hatching date and the interaction between these two effects), which may have improved the performance of those models. On the other hand, we feel that the difficulty of including such factors in pairwise regression models is an inherent limitation to the development of this approach, along with the fact that the pairwise relatedness estimates cannot be rearranged in matrix form and used in an animal model, as such matrices are negative definite. Thus, in combination with the difficulty of estimating statistical significance using the pairwise regression method, and the fact that several other tests based on this approach have also reported problems in obtaining reliable estimates (Klaper et al. 2001; Thomas et al. 2002; Wilson et al. 2003; Andrew et al. 2005; Coltman 2005; Shikano 2005; van Kleunen & Ritland 2005), we agree with previous reviews that the prospect of applying this method to a wide range of populations may be limited (Garant & Kruuk 2005; Owens 2006).
Why did the pedigree-free approach fail to recover the full pattern of quantitative-genetic covariance? The core challenge in studies of this type is lack of significant variance in relatedness among individuals in the populations according to estimates based on molecular marker data (Ritland 1996; Csilléry et al. 2006). There are, however, two different types of explanation for low variance in relatedness, which have very different implications for the prospects of the pedigree-free approach. The first explanation for low relatedness variance is that this is an intrinsic property of the population. Under this scenario, even an improved set of molecular markers would not increase relatedness variance because such variation is simply not present (Csilléry et al. 2006). In our particular case, for instance, it might be suspected that low relatedness variance may be due to the island-dwelling nature of the population. Indeed, it has recently been suggested that low relatedness variance may be a general property of wild populations (Csilléry et al. 2006), and therefore that the pedigree-free animal model may always struggle to obtain sufficient power to estimate complex genetic patterns. However, our finding that reducing the dimensionality of the molecular G matrix increased our ability to detect genetic variance argues against this possibility.
The second explanation for the apparent inability to recover the level of heritability found by the traditional animal model is that sufficient variation in relatedness does exist in the population, but we were unable to detect that variation (Csilléry et al. 2006). This could be because either the battery of molecular markers employed here was not sufficiently powerful to reveal that variation or the variation is obscured through limitation in the algorithm used to estimate the genealogy. There is some evidence to support the influence of both these sources of error variance. For instance, the molecular markers used have relatively low polymorphism so, although we have shown they are sufficiently powerful to potentially identify first-degree relatives, they may fail to differentiate among more distant relatives. Similarly, it is clear from the absolute size of the relatedness estimates in figure 1 that, although the algorithm used to construct the molecular genealogy (Fernández & Toro 2006) can, on average, distinguish successfully between close genetic relatives and unrelated pairs of individuals, the same algorithm tends to underestimate the genetic relatedness of full sibs. This underestimation is likely to be caused by a combination of a weak signal due to the low polymorphism of the molecular markers and the search procedure of the algorithm itself. Improving the performance of such methods is clearly a priority for future work if molecular genealogies are to be widely applied in animal models.
It remains an open question, however, whether natural populations in general will have sufficient variance in relatedness to facilitate the pedigree-free animal model approach or whether our study population is unusual in this respect. Our population was an isolated island population with low to moderate levels of genetic polymorphism, and our experimental design ensured that we had a sample richer in full siblings than one might expect at random. Nevertheless, if future studies do reveal substantial variation in relatedness in other wild populations, then our analyses suggest that the pedigree-free animal model may provide an opportunity to study the evolutionary genetics of wild populations, particularly if its use is complemented by the development of increasingly powerful molecular markers, more sophisticated analytical methods for reconstructing genealogies from marker data, and the subsequent dimension reduction of the resulting relatedness matrix.
All work was conducted under permits obtained from The Australian Bird and Bat Banding Scheme, the Environment Protection Agency of Queensland and the Animal Ethics Committee of the University of Queensland.
We thank the Heron Island Research Station, P & O Heron Island Resorts, Queensland Marine Parks, NERC Molecular Genetics Facility (Sheffield), S. Chenoweth, D. Dawson, C. Edwards, J. Hadfield, K. Henderson, W. Hill, J. Kikkawa, L. Kruuk, A. Krupa, M. Losiak, B. Maher, F. Manson, K. Ritland, S. Robinson-Wolrath, S. Scott, B. Sheldon, S. Twigg, B. Walsh, J. Wang and C. Wiley for help and discussion. This work was supported through funding from the Australian Research Council and the Natural Environment Research Council (UK).